Ryobi JS480L Operation Manual - Page 8

ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. n Inspect the product carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST Jig Saw Wood Cutting Blade Operator's Manual WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. INSTALLING BLADE See Figure 2, page 13. NOTE: The jig saw is designed to use both T-shank and U-shank blades.  Unplug the saw.  Lift the clamping lever on the rapid-change blade clamp until it stops.  Holding the clamping lever up, insert the saw blade (with blade teeth facing out) as far as possible into the slot in the saw bar.  Check to make sure the back of the saw blade is centered in the groove of the roller guide.  Release the clamping lever. Make sure the blade is securely in place. 8 - English