Ryobi P165 Operation Manual - Page 9

OPERATION Bond button ESSENTIALS Command Hold a few seconds Add / Delete Manually add/delete the current transmitter to/ from your Green List SKAA® will automatically add the current Amber - Auto Add transmitter to your Green List if you listen to it for 30 minutes Indicator Meaning Yellow to Green = Added Red (flash) = Deleted Yellow to Green = Added 1 Click Green Mode Rotate through your list of favorite transmitters (Green List) - when a favorite transmitter is found, the search stops and audio plays from that transmitter Green (dim) Green (flash) Green (bright) = Hunting = Next one = Bonded 2 Clicks Amber Mode Explore for new, unknown transmitters (ones which are not already on your Green List) Amber (dim) = Hunting Yellow = Bonded OTHER COMMANDS Bond button Command Indicator Meaning (slow flash) 3 Clicks Mute Do again to Unmute; any Click command will first Unmute and then do its function Yellow, Green, or = Muted Red 4 Clicks Red Mode If you have 2 or more transmitters on your Green List, power on just the one you want to hear and it plays automatically. Red (dim) Red (bright) = Hunting = Bonded 6 Clicks Factory Reset Clear Green List. Start Over! Red (flash) Reset Done 1. Power off all transmitters and receivers 2. Choose the desired Primary receiver in the cluster of receivers. 3. Power on the Primary receiver while holding down its Bond Button-hold the button down Hold during Make a Cluster until the Indicator begins to flash Red power on of Receivers 4. With the remaining receivers within 3 meters of the Primary receiver, power on the first one, wait for its Indicator to flash Red and then power on the second one; continue until all of them are powered on 5. Once all of the Indicators stop flashing (turn solid Red), power off all of the receivers Red (flash) Receiver has entered "Cluster Up" mode Red (bright) The Cluster has been successfully made 9 - English