Ryobi P2606A Operation Manual - Page 6

GENERAL POWER TOOL SAFETY WARNINGS  Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.  Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. BATTERY TOOL USE AND CARE  Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.  Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.  When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.  Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. SERVICE  Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.  When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury. HEDGE TRIMMER SAFETY WARNINGS  Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed material. Blades coast after turn off. A moment of inattention while operating the hedge trimmer may result in serious personal injury.  Carry the hedge trimmer by the handle with the cutter blade stopped. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades.  Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden wiring. Cutter blades contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.  DANGER - Keep hands away from blade. Contact with blade will result in serious personal injury.  WARNING - Only use with handle and guard properly assembled to hedge trimmer. The use of the hedge trimmer without the proper guard or handle provided may result in serious personal injury.  Use both hands when operating the hedge trimmer. Using one hand could cause loss of control and result in serious personal injury.  Always wear eye protection with side shields marked to comply with ANSI Z87.1. Following this rule will reduce the risk of serious personal injury.  Clear the area to be cut before each use. Remove all objects such as cords, lights, wire, or loose string which can become entangled in the cutting blade and create a risk of serious personal injury.  Before starting the hedge trimmer, make sure the blade is not in contact with any object.  Stop the unit, remove the battery pack, and make sure the blade has stopped before setting the unit down.  Never cut any material with a diameter larger than 3/4 in.  Always stop the motor when cutting is delayed or when walking from one cutting location to another.  Keep unit clean of clippings and other materials. They may become lodged in the cutting blades.  If hedge trimmer is equipped with a debris remover, do not use the debris remover as a gripping surface.  Store the unit inside in a dry place, either locked up or up high to prevent unauthorized use or damage. Keep out of the reach of children or untrained individuals.  Replace blade cover when unit is not in use.  Never douse or squirt the unit with water or any other liquid. Keep handles dry, clean, and free from debris. Clean after each use; see storage instructions.  Secure the unit while transporting.  Battery operated units do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards even when unit is not operating.  Remove the battery pack before making any adjustments, cleaning, storing, or removing material from the unit, or when not in use.  When transporting or storing the hedge trimmer always fit the cutting device cover.  Use only with charger listed. For use with 18 V nickelcadmium and 18 V lithium-ion battery packs. See Tool/ Appliance/Battery Pack/Charger Correlation Supplement 987000-432.  Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also. 4 - English