Ryobi P3105 Operation Manual - Page 5
Assembly, Operation
View all Ryobi P3105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. If any parts are damaged or missing, please call 1-800-525-2579 for assistance. OPERATION WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always remove battery pack from the tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. WARNING: Do not hold the soldering iron pen with your fingers near any metal part of the tool. The tip of the tool reaches working temperature within seconds. Always assume that the soldering tip is hot. Touching a hot soldering tip can result in serious personal injury. WARNING: Do not use or store the soldering iron near flammable or combustible materials or liquids. These materials may ignite when exposed to the high temperatures created by the tip. APPLICATIONS You may use this product for the purposes listed below: Soldering circuits and electrical connections Soldering of jewelry, stained glass, and other crafts WARNING: Battery tools are always in operating condition. Place the switch in the off position and remove the battery pack when the product is not in use or when carrying at your side. INSTALLING/REMOVING BATTERY PACK See Figure 1, page 7. Make sure the on/off switch is in the off position. Insert the battery pack into the product as shown. Make sure the latches on each side of the battery pack snap into place and that battery pack is secured in the product before beginning operation. Depress the latches to remove the battery pack. For complete charging instructions, see the operator's manuals for your battery pack and charger. ON/OFF SWITCH See Figure 2, page 7. The LED indicator will light up when a charged battery pack is installed and the switch is turned to the on position. If the indicator light is on, the tip is heating. Install the battery pack. Press the on/off switch to turn the power on. 5 - English