Ryobi P320 Operation Manual - Page 7

FEATURES PRODUCT SPECIFICATIONS Motor 18 Volt DC Magazine Capacity 105 Nails Nailer Speed up to 60 shots/min. Nail Type 18 gauge Brad Nail Length 5/8 - 2 in. KNOW YOUR brad nailer See Figure 1, page 14. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. Air pressure dial Adjust internal air pressure to adjust force for more control. AirStrike™ Technology Airstrike™ Technology provides cordless convenience, eliminating the need for a compressor and bulky air hose construction ruler A construction ruler located along the left side of the magazine allows the operator to make quick measurements while working. DEPTH of drive ADJUSTMENT The tool-free depth of drive adjustment lets the operator select precise driving depth of the nail. DRY-FIRE LOCKOUT The dry-fire lockout feature keeps the tool from operating when nails are low in the magazine to prevent missing nails in the nail pattern and extend tool life. led worklights LED worklights provide light and diagnostic feedback. LOW Nail indicator WINDOWs The open windows in the magazine show how many nails remain in the tool. mode selector The mode selector lets the operator choose between Single Sequential Actuation for precise nail placement and Contact Actuation for higher productivity NO-MAR PAD The no-mar pad prevents marring and denting when using the tool on softer woods. workpiece contact The tool will drive a nail each time the trigger is depressed, as long as the workpiece contact is depressed. CALIFORNIA PROPOSITION 65 WARNING: This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities may contain chemicals, including lead, known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands after handling. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products and, • arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. 7 ­- English