Ryobi P4500K Operator Manual - Page 6

FEATURES PRODUCT SPECIFICATIONS Motor...18 V DC No Load Speed (revolutions per minute approx. 210/min (RPM) Waterproof Rating...IPX7* * IP Rating: Specifies the environmental protection the product enclosure provides. This product has an IPX7 rating meaning it can withstand immersion in water up to 1 meter for up to 30 minutes. KNOW YOUR POWER SCRUBBER The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. ADJUSTABLE FRONT HANDLE The front handle assembly can be adjusted for ease of operation and to help prevent loss of control. BATTERY COVER The battery cover protects the battery port and battery from moisture and debris. NOTE: This product is not recommended for use with RYOBI ONE+ battery packs larger than 4.0Ah. If installed, large capacity battery packs will prevent the battery cover from closing completely exposing the battery and the battery port to moisture, debris, and other contaminants. SIX-POSITION PIVOTING HEAD The motor head can be adjusted with the pivot button. REAR HANDLE WITH OVERMOLD The rear handle with overmold provides added user comfort. TELESCOPING SHAFT The scrubber can be adjusted to different extension points for ease of use. ASSEMBLY UNPACKING This product requires assembly. „ Carefully remove the tool and any accessories from the box. All items listed in the Includes section must be included at the time of purchase. WARNING: Items in this Assembly section are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. „ If any parts are damaged or missing, please call 1-800-525-2579 for assistance. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts. ATTACHING THE FRONT HANDLE See Figure 1, page 10. „ Slide the spacer into the opening at the bottom of the bracket. „ Insert the wing bolt through the bracket, spacer, and handle as shown. „ Adjust handle up or down, if necessary, to desired operating position. „ Tighten wing bolt to secure. 6 - English