Ryobi P531 Manual 1 - Page 5

FEATURES PRODUCT SPECIFICATIONS No Load Speed...27,000 r/min. (RPM) Collet...1/4 in. Collet Adaptor...1/8 in. ASSEMBLY WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. If any parts are damaged or missing, please call 1-800-525-2579 for assistance. OPERATION WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always remove battery pack from the tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this product for the purposes listed below:  Cutting electrical outlet openings in drywall or wood pan- eling. It is recommended to use a 1/8 in. bit for cutting wood paneling.  Creating decorative wood accents  Cutting tile NOTE: Applications for this tool require different types of bits. Be sure to use the right bit for your tool. STARTING/STOPPING SPEED SAW See Figure 1, page 8.  Push the switch left or right as shown. WARNING: Battery tools are always in operating condition. Lock the switch when not in use or carrying at your side, when installing or removing the battery pack, and when installing or removing bits. INSTALLING/REMOVING BATTERY PACK See Figure 2, page 8.  Insert the battery pack into the product as shown.  Make sure the latches on each side of the battery pack snap in place and that battery pack is secured in the product before beginning operation.  Depress the latches to remove the battery pack. For complete charging instructions, see the operator's manuals for your battery pack and charger. 5