Ryobi P611 Operation Manual - Page 5

FEATURES PRODUCT SPECIFICATIONS No Load Speed 11,000/min. Maximum Planing Width 3-1/4 in. Maximum Planing Depth 1/16 in. Maximum Rabbet Depth 1/2 in. ASSEMBLY WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. If any parts are damaged or missing, please call 1-800-525-2579 for assistance. OPERATION WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.  Planing the edge of a piece of lumber  Making rabbet cuts in wood  Chamfering sharp edges of lumber ADJUSTING THE EXHAUST DIRECTION See Figure 1, page 11. WARNING: Always remove battery pack from the tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. WARNING: WARNING: Collected dust from planing surface coatings such as polyurethanes, linseed oil, etc., can self-ignite in the planer dust bag or elsewhere and cause fire. To reduce the risk of fire, always empty the dust bag frequently while planing. NEVER store or leave a planer without totally emptying its dust bag. Also follow the recommendations of the coatings manufacturers. Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. Change the direction of the exhaust to either the right or left to control the direction of debris when working in confined areas. To adjust the exhaust direction and dust bag:  Remove the battery pack.  To adjust exhaust to the right: Move the exhaust direction lever so the arrow points right (the handle will point left). Install the dust bag on the right exhaust port.  To adjust exhaust to the left: Move the exhaust direction lever so the arrow points left (the handle will point right). Install the dust bag on the left exhaust port. APPLICATIONS You may use this tool for the purposes listed below:  Planing the edge of a wooden door or shelf NOTE: Check that the dust bag is attached to the same port selected by the exhaust direction lever. 5 - English