Ryobi P611 Operation Manual - Page 9
Note: Illustrations Start On After French And Spanish Language S.
View all Ryobi P611 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
MAINTENANCE Insert the blade holder into the cutter block assembly. Retighten the three blade securing screws using the blade wrench. Repeat the above procedure to change the other blade. REPLACING THE BELT See Figures 17 - 18, page 13. When replacing the belt, use the recommended replacement belt only, RYOBI part number 039821001042. Remove the battery pack. Remove belt cover screws. Remove the belt cover. Force the old belt from the small pulley by turning in the direction shown. As you turn the belt, pull and work it off the small pulley until it has been completely removed from both pulleys. Install the new belt over the small pulley, being sure to align the grooves. As you turn the belt, push and work it onto the large pulley until it is in place. Replace the belt cover. Install belt cover screws and tighten securely. NOTE: Do not overtighten the screws. ACCESSORIES Look for these accessories where you purchased this product or call 1-800-525-2579. Planer Blades...039821001057 Belt...039821001042 NOTE: ILLUSTRATIONS START ON PAGE 11 AFTER FRENCH AND SPANISH LANGUAGE SECTIONS. 9 - English