Ryobi P635 Operation Manual - Page 2

TABLE OF CONTENTS  Introduction...2  Warranty...2  Important Safety Instructions...3  Specific Safety Rules...4-5  Symbols...6  Features...7  Assembly...7-8  Operation...9-11  Maintenance...12-13  Troubleshooting...14  Figure numbers (illustrations)...15-17  Parts Ordering / Service...Back page INTRODUCTION This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate. warranty RYOBI® POWER TOOL - LIMITED TWO YEAR WARRANTY AND 30 DAY EXCHANGE POLICY One World Technologies, Inc., warrants its RYOBI® power tools with the following conditions: 30-DAY EXCHANGE POLICY: During the first 30 days after date of purchase, you may either request service under this warranty or you may exchange any RYOBI® power tool which does not work properly due to defective workmanship or materials by returning the power tool to the dealer from which it was purchased. To receive a replacement power tool or requested warranty service, you must present proof of purchase and return all original equipment packaged with the original product. The replacement power tool will be covered by the limited warranty for the balance of the two year period from the date of the original purchase. WHAT THIS WARRANTY COVERS: This warranty covers all defects in workmanship or materials in your RYOBI® power tool for a period of two years from the date of purchase. With the exception of batteries, power tool accessories are warranted for ninety (90) days. Batteries are warranted for two years. HOW TO GET SERVICE: Just return the power tool, properly packaged and postage prepaid, to an Authorized Service Center. You can obtain the location of the Service Center nearest you by contacting a service representative at One World Technologies, Inc., P.O. Box 1207, Anderson, SC 29622-1207, by calling 1-800-525-2579 or by logging on to www. ryobitools.com. When you request warranty service, you must also present proof of purchase documentation, which includes the date of purchase (for example, a bill of sale). We will repair any faulty workmanship, and either repair or replace any defective part, at our option. We will do so without any charge to you. We will complete the work in a reasonable time, but, in any case, within ninety (90) days or less. WHAT'S NOT COVERED: This warranty applies only to the original purchaser at retail and may not be transferred. This warranty only covers defects arising under normal usage and does not cover any malfunction, failure or defects resulting from misuse, abuse, neglect, alteration, modification or repairs by other than Authorized Service Centers. One World Technologies, Inc. makes no warranties, representations or promises as to the quality or performance of its power tools other than those specifically stated in this warranty. ADDITIONAL LIMITATIONS: Any implied warranties granted under state law, including warranties of merchantability or fitness for a particular purpose, are limited to two years from the date of purchase. One World Technologies, Inc. is not responsible for direct, indirect, or incidental damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2 - English important safety instructions WARNING: SAVE THESE INSTRUCTIONS. To reduce the risks of fire or explosion, electric shock, and the injury to persons, read and understand all instructions included in this manual. Be familiar with the controls and the proper usage of the equipment. READ ALL INSTRUCTIONS  KNOW YOUR POWER TOOL. Read the operator's manual carefully. Learn the machine's applications and limitations as well as the specific potential hazards related to this tool. WARNING: To reduce the risk of fire or explosion:  Do not spray flammable or combustible materials near an open flame or sources of ignition such as cigarettes, motors, and electrical equipment.  For units intended for use with only water-based or mineral spirit-type materials with a minimum flash point of 60°C (140°F), do not spray or clean with liquids having a flash point less than 60°C (140°F).  Paint or solvent flowing through the equipment is able to result in static electricity. Static electricity creates a risk of fire or explosion in the presence of paint or solvent fumes.  Do not use a paint or a solvent containing halogenated hydrocarbons.  Keep spray area well ventilated. Keep a good supply of fresh air moving through the area. Keep pump assembly in a well ventilated area. Do not spray pump assembly.  Do not smoke in the spray area.  Do not operate light switches, engines, or similar spark producing products in the spray area.  Keep area clean and free of paint or solvent containers, rags, and other flammable materials.  Know the contents of the paints and solvents being sprayed. Read all Material Safety Data Sheets (MSDS) and container labels provided with the paints and solvents. Follow the paint and solvent manufacturer's safety instructions.  Fire extinguisher equipment shall be present and working. WARNING: To reduce the risk of skin injection:  Do not aim the nozzle at, or spray any person or animal.  Keep hands and other body parts away from the discharge. For example, do not try to stop leaks with any part of the body.  Always use the spray tip. Do not spray without spray tip in place.  Only use a spray tip specified by the manufacturer.  Use caution when cleaning and changing spray tips. In the case where the spray tip clogs while spraying, follow the manufacturer's instructions for turning off the unit before removing the spray tip to clean.  Do not leave the unit energized while unattended. When the unit is not in use, turn off the unit in accordance with the manufacturer's instructions.  High pressure spray is able to inject toxins into the body and cause serious bodily injury. In the event that injection occurs, seek medical attention immediately.  Check hoses and parts for signs of damage. Replace any damaged hoses or parts.  This system is capable of producing 2500 psi. Only use replacement parts or accessories that are specified by the manufacturer and that are rated a minimum of 2500 psi.  Know how to stop the unit and bleed pressure quickly. Be thoroughly familiar with the controls.  Verify that all connections are secure before operating this unit.  For household use only. WARNING: To reduce the risk of injury:  Do not operate or spray near children. Keep children away from equipment at all times.  Do not overreach or stand on an unstable support. Keep effective footing and balance at all times.  Stay alert and watch what you are doing.  Do not operate the unit when fatigued or under the influence of drugs or alcohol.  Do not kink or overbend the hose.  Do not expose the hose to temperatures or to pressures in excess of those specified by the manufacturer.  Do not use the hose as a strength member to pull or lift the equipment. 3 - English