Ryobi P720 User Manual - Page 5

ASSEMBLY WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. If any parts are damaged or missing, please call 1-800-525-2579 for assistance. OPERATION WARNING: Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. TO INSTALL/REMOVE BATTERY PACK See Figure 1, page 9. To install:  Lock the switch trigger by sliding the switch lock up.  Insert the battery pack into the product as shown.  Make sure the latches on each side of the battery pack snap in place and that battery pack is secured in the product before beginning operation. To remove:  Lock the switch trigger by sliding the switch lock up.  Depress the latches on the side of battery pack.  Remove the battery pack from the tool. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this tool for the following purposes:  Sealing cracks to keep your home's conditioned air inside while keeping unconditioned air outside, increasing your home's energy efficiency  Filling holes and cracks before painting  Creating a moisture barrier around areas that could be damaged by water  Sealing cracks to keep insects from crawling inside your home  Applying adhesive WARNING: Battery products are always in operating condition. Therefore, the switch should always be locked when not in use or carrying at your side. LOCKING THE SWITCH TRIGGER See Figure 2, page 9. The switch trigger can be locked off using the slide switch located below the switch trigger.  To lock the switch trigger, slide the switch lock up. This will prevent the switch trigger from being depressed.  To unlock the switch trigger, slide the switch down. This will allow the switch trigger to be depressed. STARTING/STOPPING THE CAULK GUN See Figure 2, page 9. Before attempting to start the caulk gun, be sure the switch lock is in the unlocked position.  To turn the caulk gun ON, depress the switch trigger.  To turn the caulk gun OFF, release the switch trigger. 5 - English