Ryobi P727K1 Operation Manual - Page 5

ASSEMBLY WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. If any parts are damaged or missing, please call 1-800-525-2579 for assistance. OPERATION WARNING: Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result in serious injury or vision loss. WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. TURNING THE WORKBENCH LIGHT ON/OFF See Figure 2, page 7.  Mode 1: Press the ON/OFF button to turn the light on. NOTE: This will turn on both the upper and lower portion of the workbench light.  Mode 2: Press ON/OFF button 2 times to turn off the upper portion of the workbench light.  Mode 3: Press ON/OFF button 3 times to turn on the upper light and turn off the lower portion of the workbench light.  To stop the workbench light, press the ON/OFF button 4 times. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this tool for the purpose listed below:  General illumination of most work area spaces. INSTALLING/REMOVING BATTERY PACK See Figure 1, page 7.  Insert the battery pack into the product as shown.  Make sure the latches on each side of the battery pack snap into place and the battery pack is secured before beginning operation.  Depress the latches to remove the battery pack. For complete charging instructions, see the operator's manuals for your battery pack and charger. WARNING: Battery tools are always in operating condition. Therefore, unit should always be in the OFF status, with the battery pack removed, when not in use. Do not leave light on while unattended. Failure to follow these instructions could result in serious personal injury. WARNING: Keep workbench light away from combustible materials. If wrapped or in contact with fabrics, the work light lens can produce sufficient heat to melt some fabrics. To avoid serious personal injury, never allow the work light lens to come in contact with anything. 5 - English