Ryobi P727K1 Operation Manual - Page 6

OPERATION TO HANG THE WORKBENCH LIGHT See Figures 3 - 5, page 8. WARNING: Only hang or mount LED work light in an area where no electrical wires, utility cables, pipes, or other obstructions are located. Contact your local utility company or a qualified electrician if you are unsure. Do not hang work light from any electrical power cord. Ensure work light is securely installed to prevent falling object hazard. Failure to follow these instructions can result in electrocution, electrical shock, or other serious personal injury. Using the J hook to hang the work light:  Fold the workbench light in half at the joint as shown.  Lift the J hook from the slot.  Use the J hook to hang the workbench light. You may use a screw to secure the workbench light in place. Do not overtighten. NOTE: Be careful not to hang the workbench light in such a way that it prevents normal workbench light operation. Using the mounting holes to hang the light:  Unfold the workbench light to a straight position as shown.  Lift the mounting brackets as shown and hang the workbench light from a sturdy location using the screws in the mounting holes to secure in place. Do not overtighten. NOTE: Be careful not to hang the workbench light in such a way that it prevents normal workbench light operation. Using the hooks in the mounting hole brackets to hang the light:  Unfold the workbench light to a straight position as shown.  Pull out and flip up the hooks from the mounting bracket and use the hooks to mount the light NOTE: Be careful not to hang the workbench light in such a way that it prevents normal workbench light operation. ADJUSTABLE HEAD See Figure 5, page 9. CAUTION: Do not place hands or fingers between adjustable head and frame when positioning workbench light to avoid pinching your fingers or hands. The workbench light head can be set in a variety of positions. To switch positions, adjust head to desired position. MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts could create a hazard or cause product damage. STORING THE WORKBENCH LIGHT Store indoors in a dry, locked up place-out of the reach of children with the battery pack removed and power cord disconnected. Keep away from corrosive agents such as garden chemi­cals and de-icing salts. GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. NOTE: ILLUSTRATIONS START ON PAGE 7 AFTER FRENCH AND SPANISH LANGUAGE SECTIONS. 6 - English