Ryobi P738 Manual 1 - Page 5

FEATURES PRODUCT SPECIFICATIONS Maximum Pressure 0.5 PSI Duty Cycle Continuous ASSEMBLY WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. If any parts are damaged or missing, please call 1-800-525-2579 for assistance. OPERATION WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury. WARNING: Do not leave items to be inflated unattended while inflator is in use. These items can burst and could cause serious injury. NOTICE: The inflator is capable of inflating to 0.5 PSI. To avoid over inflation, carefully follow instructions on items to be inflated. To avoid product damage, never exceed recommended pressures. APPLICATIONS You may use this inflator for the purpose listed below:  Large (high volume) nozzle: Cleaning work surfaces, inflating air mattresses and other large inflatables  Small nozzle: Inflating beach balls and similar inflatables  Deflation port: Quickly deflating items NOTE: The inflator is not designed for commercial applications. TO INSTALL/REMOVE BATTERY PACK See Figure 1, page 7. To install:  Place the battery pack in the product. Align the raised rib on the battery pack with groove in the battery port.  Make sure the latches on each side of the battery pack snap in place and that the battery pack is secured in the tool before beginning operation. To remove:  Depress the latches on both sides of the battery pack to release the battery pack and remove it from the tool. For complete charging instructions, see the operator's manuals for your battery pack and charger. WARNING: Battery tools are always in operating condition. Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. 5 - English