Ryobi P747 Operation Manual - Page 5

FEATURES PRODUCT SPECIFICATIONS Motor 18 Volt DC High Pressure Hose Length 24 in. Low Pressure Hose Length 12 in. Gauges Digital Readout (PSI) Maximum Pressure 150 PSI ASSEMBLY WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. If any parts are damaged or missing, please call 1-800-525-2579 for assistance. OPERATION WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always remove battery pack from the tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury. WARNING: Do not leave items to be inflated unattended while inflator is in use. These items can burst and could cause serious injury. WARNING: The pressure gauge on this unit is not calibrated. Tire pressure must be checked using a reliable measuring device before driving a vehicle with tires inflated with this unit. Driving a vehicle with improperly inflated tires could result in serious injury. NOTICE: The inflator is not designed for continuous use. For every ten minutes of inflator use, ten minutes of cool down time is required. NOTICE: The inflator is capable of inflating to 150 PSI. To avoid over inflation, carefully follow instructions on items to be inflated. To avoid product damage, never exceed recommended pressures. 5 - English