Ryobi P747 Operation Manual - Page 8

OPERATION INFLATING WITH THE HIGH PRESSURE AIR HOSE AND ACCESSORIES See Figures 10 - 12, page 12. The high pressure air hose can be used with the provided adaptors to inflate a variety of items.  To install accessory, thread adaptor (or needle) into air chuck. Inflate to desired pressure.  Remove accessory after inflating and return to storage area on the side of the unit. ACCESSORIES STORAGE See Figure 13, page 12. When not in use, adaptors and needles provided with the inflator can be placed in the storage area located on the right side of the unit. HOSE STORAGE See Figures 13 - 14, page 12. When not in use, the hoses provided with the inflator can be placed in the storage areas located on both sides of the unit. MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts can create a hazard or cause product damage. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. WARNING: Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which can result in serious personal injury. NOTE: ILLUSTRATIONS START ON PAGE 10 AFTER FRENCH AND SPANISH LANGUAGE SECTIONS. 8 - English