Ryobi RTS20 English Manual - Page 15

Assembly - accessories

Get Ryobi RTS20 PDF manuals and user guides View all Ryobi RTS20 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

ASSEMBLY UNPACKING This product requires assembly.  Carefully remove the tool and any accessories from the box. Place it on a level work surface. NOTE: This tool is heavy. To avoid back injury, keep your knees bent and lift with your legs, not your back, and get help when needed.  Inspect the tool carefully to make sure no breakage or damage occurred during shipping.  Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. NOTE: Remove the foam block from between the saw's housing and the motor.  The saw is factory set for accurate cutting. After assembling it, check for accuracy. If shipping has ­influenced the settings, refer to specific procedures ­explained in this manual.  If any parts are damaged or missing, please call 1-800-525-2579 for assistance. WARNING: To avoid serious personal injury, always make sure the table saw is securely mounted to a workbench or an ­approved leg stand. NEVER operate the saw on the floor. to assemble the quick stand™ See Figures 6 - 7. NOTE: Do not use this leg stand with other equipment or for other purposes.  Remove the Quick Stand™ from leg stand storage in the back of the saw by separating the hook and loop straps.  Place the Quick Stand™ on the floor then open by ­pushing opposite legs in opposite directions as indicated by the arrows in figure 6. Warning: If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. warning: Do not attempt to modify this tool or create ­accessories not recommended for use with this tool. Any such ­alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. HOOK AND LOOP STRAPS WARNING: Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. WARNING: Do not lift the saw without help. Hold it close to your body. Keep your knees bent and lift with your legs, not your back. Ignoring these precautions can result in back injury. Fig. 6 warning: Never stand directly in line with the blade or allow hands to come closer than 3 in. to the blade. Do not reach over or across the blade. Failure to heed this warning can result in serious personal injury. 15 Fig. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
15
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the
box. Place it on a level work surface.
NOTE:
This tool is heavy. To avoid back injury, keep your
knees bent and lift with your legs, not your back, and get
help when needed.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
NOTE:
Remove the foam block from between the saw’s
housing and the motor.
The saw is factory set for accurate cutting. After
assembling it, check for accuracy. If shipping has
influenced the settings, refer to specific procedures
explained in this manual.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
WARNING:
If any parts are missing, do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not connect to power supply until assembly is com-
plete. Failure to comply could result in accidental starting
and possible serious personal injury.
WARNING:
Do not lift the saw without help. Hold it close to your
body. Keep your knees bent and lift with your legs, not
your back. Ignoring these precautions can result in back
injury.
WARNING:
Never stand directly in line with the blade or allow hands
to come closer than 3 in. to the blade. Do not reach over
or across the blade. Failure to heed this warning can
result in serious personal injury.
ASSEMBLY
WARNING:
To avoid serious personal injury, always make sure the
table saw is securely mounted to a workbench or an
approved leg stand. NEVER operate the saw on the
floor.
TO ASSEMBLE THE QUICK STAND™
See Figures 6 - 7.
NOTE:
Do not use this leg stand with other equipment or
for other purposes.
Remove the Quick Stand™ from leg stand storage in the
back of the saw by separating the hook and loop straps.
Place the Quick Stand™ on the floor then open by pushing
opposite legs in opposite directions as indicated by the
arrows in figure 6.
Fig. 6
Fig. 7
HOOK
AND LOOP
STRAPS