Ryobi RTS22 Operation Manual - Page 36
Making A Compound Bevel Miter Cut, Warning
View all Ryobi RTS22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
OPERATION MAKING A COMPOUND (BEVEL) MITER CUT See Figure 45. WARNING: Make sure the blade guard assembly is installed and working properly to avoid possible serious injury. COMPOUND (BEVEL) MITER CUT PLACE LEFT HAND ON MITER GAUGE HERE WARNING: The miter gauge must be on the right side of the blade to avoid trapping the wood and causing kickback. Placement of the miter gauge to the left of the blade will result in kickback and the risk of serious personal injury. Remove the rip fence. Unlock the bevel locking lever. Adjust the bevel angle to the desired setting. Lock the bevel locking lever. Set the blade to the correct depth for the workpiece. Set the miter gauge to the desired angle and tighten the lock knob. Make sure the wood is clear of the blade before turning on the saw. Turn the saw on. Let the blade build up to full speed before moving the workpiece into the blade. Hold the workpiece firmly with both hands on the miter gauge and feed the workpiece into the blade. NOTE: The hand closest to the blade should be placed on the miter gauge lock knob and the hand farthest from the blade should be placed on the workpiece. When the cut is made, turn the saw off. Wait for the blade to come to a complete stop before removing the workpiece. Fig. 45 36 - English