Ryobi RY1419MT Operation Manual - Page 12

FEATURES RETRACTABLE HANDLE The pressure washer is equipped with a retractable handle that can be adjusted for storage and transportation. SOAP NOZZLE The blue or black soap nozzle is used to apply detergent at low pressure only. SOAP TANK Remove the cap from the soap tank to add detergent to the pressure washer. TRIGGER HANDLE The trigger handle has a gripping surface that provides added control of the spray wand and helps reduce fatigue. TRIGGER WITH LOCK-OUT Pulling the trigger releases a stream of water for high pressure cleaning. The lock-out provides protection against unauthorized use. ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. n Inspect the product carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. n If any parts are damaged or missing, please call 1-800-860-4050 for assistance. PACKING LIST Electric Pressure Washer 25 ft. High Pressure Hose Trigger Handle Spray Wand Nozzles (15º, Turbo, Soap) Operator's Manual WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. CONNECTING THE SPRAY WAND TO THE TRIGGER HANDLE See Figure 4 n Push the end of the spray wand into the trigger handle and rotate clockwise to secure. n Pull on the spray wand to be certain it is properly secured. CONNECTING THE HIGH PRESSURE HOSE TO THE TRIGGER HANDLE See Figure 5. n Screw the collar on the high pressure hose into the trigger handle inlet coupler by turning the hose collar clockwise. Tighten securely. NOTE: Be careful to avoid cross-threading, which can cause the trigger handle to leak during use. n Pull on the hose to be certain it is properly secured. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. 8 - English