Ryobi RY1419MT Operation Manual - Page 17

OPERATION n Squeeze bottle to inject contents into pump. n Pump is protected when the protector fluid exits the pump outlet. MOVING THE PRESSURE W­ ASHER See Figure 14. n Turn the pressure washer off. Point nozzle in a safe direction and pull trigger to release water pressure. n Disconnect pressure washer from power supply. n P ull the retractable handle out or carry by the carry handle. n Using the retractable handle, face the front of the pressure washer, grasp the retractable handle firmly with one hand. n Lift the pressure washer toward you until it balances on the wheels. n Move to the desired location then lower the pressure washer until it sits securely on a flat surface. n Using the carrying handle, get a firm grasp of the unit. Lift the unit into a safe and comfortable carrying position. Move machine to the desired location. MAINTENANCE WARNING: Before inspecting, cleaning, or servicing the machine, shut off motor, wait for all moving parts to stop, disconnect unit from power supply, and pull trigger to release water pressure. Failure to follow these instructions can result in serious personal injury or property damage. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. WARNING: When servicing, use only identical replacement parts. Use of any other parts could create a hazard or cause product damage. NOTICE: Periodically inspect the entire product for damaged, missing, or loose parts such as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product until all missing or damaged parts are replaced. Please call customer service or contact an authorized service center for assistance. GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. WARNING: Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic which could result in serious personal injury. POWER SUPPLY CORD REPLACEMENT If replacement of the power supply cord is necessary, this must be done by an authorized service center in order to avoid a safety hazard. PUMP LUBRICATION The pump on this unit is lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. Therefore, no further lubrication is required. PUMP MAINTENANCE Routinely make a visual inspection of the pump. If you notice any leaking of lubricant around the pump seals, take the pressure washer to an authorized service center for repair. There are no user serviceable parts to the pressure washer pump. Any attempt to service or alter the pump may damage the pressure washer and void your product warranty. 13 - English