Ryobi RY15703 Operator's Manual - Page 5

FEATURES PRODUCT SPECIFICATIONS Cutting Capacity 3/8 in. Effective Cutting Area 17-1/2 in. Weight 4.1 lbs. KNOW YOUR HEDGE TRIMMER ATTACHMENT See Figure 1. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all o­ perating features and safety rules. SCABBARD Always use the scabbard to cover the blade when the ­attachment is not in use. ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the items from the box. Make sure that all items listed in the packing list are included. n Inspect the product carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have care- fully inspected and satisfactorily operated the product. n If any parts are damaged or missing, please call 1-800-860-4050 for assistance. PACKING LIST Ryobi® Expand-It™ Hedge Trimmer Attachment Scabbard Operator's Manual WARNING: Do not connect to power head until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. ATTACHING THE HEDGE TRIMMER ATTACHMENT TO THE POWER HEAD See Figure 2. WARNING: Never attach or adjust any attachment while power head is running. Failure to stop the engine may cause serious personal injury. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. The hedge trimmer attachment connects to the power head by means of a coupler device.  Remove the hanger cap from the attachment  Loosen the knob on the coupler of the power head shaft.  Push in the button located on the hedge trimmer ­attachment. Align the button with the guide recess on the extension shaft coupler and slide the two shafts together. Rotate attachment until button locks into the positioning hole.  Tighten the knob securely. NOTE: If the buttons do not release completely in the positioning holes, the shafts are not locked into place. Slightly rotate from side to side until the button is locked into place. NOTE: Use only the specified positioning hole for this attachment. 5 - English