Ryobi RY40210A User Manual 2 - Page 9

MAINTENANCE ATTACHING THE STORAGE HANGER See Figure 14. There are two ways to hang the attachment for storage.  To use the hanger cap, push in the button and place the hang- er cap over the end of the attachment shaft. Slightly rotate the cap from side to side until the button locks into place.  The secondary hole in the attachment shaft can be used for hanging purposes as well. STORING THE ATTACHMENT  Store the attachment in a well-ventilated place that is inaccessible to children.  Keep away from corrosive agents such as garden chemicals and deicing salts. REPLACEMENT PARTS 0.080 in. Twisted Replacement Line (Bulk AC04138 0.080 in. Twisted Replacement Line (Pre-cut)........AC04139 Available at homedepot.com TROUBLESHOOTING PROBLEM Line will not advance when using the auto-feed head Grass wraps around boom housing and string head POSSIBLE CAUSE Line is welded to itself. Not enough line on spool. Line is worn too short. Line is tangled on spool. Cutting tall grass at ground level. SOLUTION Lubricate with silicone spray. Install more line. Refer to Line Replacement earlier in this manual. Pull line while pressing button. Remove line from spool and rewind. Refer to Line Replacement earlier in this manual. Cut tall grass from the top down to prevent wrapping. CALL US FIRST For any questions about operating or maintaining your product, call the Ryobi® Help Line! Your product has been fully tested prior to shipment to ensure your complete satisfaction. 9 - English