Ryobi RY40630 Operation Manual - Page 10
Operation
![]() |
View all Ryobi RY40630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
OPERATION WARNING: Never use the debris remover as a handle or attempt to hold or guide the hedge trimmer by gripping the debris remover. Always keep both hands on the hedge trimmer handles. Improper handling of hedge trimmer could result in serious injury. This product will accept Ryobi 40 V lithium-ion battery packs. For complete charging instructions, refer to the Operator's Manuals for your Ryobi battery pack and charger models. BATTERY PROTECTION FEATURES Ryobi lithium-ion batteries are designed with features that protect the lithium-ion cells and maximize battery life. If the tool stops during use, release the trigger to reset and resume operation. If the tool still does not work, the battery needs to be recharged. TO INSTALL/REMOVE BATTERY PACK See Figure 3. WARNING: Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. To install: Place the battery pack in the hedge trimmer. Align the raised rib on the battery pack with groove in the hedge trimmer's battery port. WARNING: Make sure the latch on the bottom of the battery pack snaps in place and the battery pack is fully seated and secure in the hedge trimmer battery port before beginning operation. Failure to securely seat the battery pack could cause the battery pack to fall out, resulting in serious personal injury. CAUTION: When placing battery pack in the tool, be sure raised rib on battery pack aligns with the bottom of the tool and latches into place properly. Improper installation of the battery pack can cause damage to internal c omponents. To remove: Locate the latch on the bottom of the battery pack and depress to release the battery pack from the hedge trimmer. WARNING: Battery tools are always in operating condition. Therefore, switch should always be locked with hands free of the lock-out button when not in use. Remove battery pack when transporting or carrying hedge trimmer to avoid accidental starting, which could result in serious injury. STARTING AND STOPPING THE HEDGE TRIMMER See Figure 4. To start: Remove the blade cover. Press and hold the lock-out button. Depress the switch trigger. Release the lock-out button. Continue to depress the switch trigger for extended operation. To stop: Release the switch trigger to stop the hedge trimmer. Upon release of the switch trigger, the lock-out button will automatically reset to the locked position. HOLDING THE HEDGE TRIMMER See Figure 5. The unit has both a front and rear handle. With the blade directed away from you, hold the unit by both handles. WARNING: Always keep both hands on the hedge trimmer handles. Never hold shrubs with one hand and operate the hedge trimmer with the other. Improper operation of the hedge trimmer could result in serious injury. CUTTING TIPS See Figures 6 - 7. DANGER: Never cut near electric cords or lines. If blade jams on any electrical cord or line, DO NOT TOUCH THE BLADE! IT CAN BECOME ELECTRICALLY LIVE AND VERY DANGEROUS. Continue to hold the hedge trimmer by the insulated rear handle or lay it down and away from you in a safe manner. Disconnect the electrical service to the damaged line or cord before attempting to free the blade from the line or cord. Contact with the blade, other conductive parts of the hedge trimmer, or live electric cords or lines will result in death by electrocution or serious injury. 8 - English
![](/manual_guide/products/ryobi-ry40630-operation-manual-858f4ff/10.png)