Ryobi RY803325 Operation Manual - Page 10
Features
View all Ryobi RY803325 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
FEATURES PRODUCT SPECIFICATIONS Fuel Tank Capacity...0.24 gal. Honda GCV200 engine...202cc Maximum Pounds Per Square Inch Pressure*...3300 psi Maximum Gallons Per Minute*...2.5 gpm Maximum Inlet Water Temperature...104˚F *Max. rating determined by PWMA Standard 101 KNOW YOUR PRESSURE WASHER See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. 5-IN-1 CHANGE-OVER NOZZLE The 5-in-1 Change-over Nozzle makes it easy to change spray patterns. AUTOMATIC CHOKE SYSTEM The automatic choke system allows the engine to start easily whether cold or hot and is ready to use immediately. AUTOMATIC SOAP INJECTION SYSTEM Pour pressure washer detergent into the soap tank to apply detergent quickly and easily to your cleaning project. Use of the soap nozzle will activate the soap injector at a 20:1 dilution ratio. FUEL TANK This fuel tank has a maximum capacity of 0.24 gal. Use unleaded automotive gasoline in the engine. HONDA GCV200 ENGINE This Honda engine enables the pressure washer to achieve 3,300 psi (pounds per square inch) at a rate of 2.5 gpm (gallons per minute). Please read the engine manual included with this product. HOSE STORAGE Once the high pressure hose is rolled, hang it on the back of the machine using the stretch strap to secure in place. IDLE DOWN The engine idle speed is automatically reduced when the trigger is released. This feature increases fuel efficiency, reduces the noise level, and decreases wear and tear over the life of the pressure washer. ON/OFF SWITCH The on/off switch is used in combination with the starter grip and rope to start the engine. It is also used to turn the engine off. STARTER GRIP AND ROPE The starter grip and rope is pulled to start the machine. THERMAL RELIEF VALVE This pump feature will prevent water temperatures from reaching harmful levels by releasing a small amount of water. Once the water has drained, the thermal relief valve will reset itself. TRIGGER HANDLE The trigger handle has a gripping surface that provides added control of the spray wand and helps reduce fatigue. TRIGGER WITH LOCK OUT Pulling the trigger releases a stream of water for high pressure cleaning. The lock out provides protection against unauthorized use. 6 - English