Ryobi RY80588A Operation Manual - Page 10

FEATURES PRODUCT SPECIFICATIONS Fuel Tank Capacity...0.95 gal. Lubricant Fill Volume...14 oz. Maximum Pounds Per Square Inch Pressure*...3,200 psi Maximum Gallons Per Minute*...2.5 gpm Maximum Inlet Water Temperature...104˚F Replacement Spark Plug...Torch/LG F7RTC or equivalent *Max. rating determined by PWMA Standard PW101 KNOW YOUR PRESSURE WASHER See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. AUTOMATIC SOAP INJECTION SYSTEM Pour pressure washer detergent into the soap tank to apply detergent quickly and easily to your cleaning project. Use of the soap nozzle will activate the soap injector at a 20:1 dilution ratio. FUEL TANK This fuel tank has a maximum capacity of 0.95 gal. Use unleaded automotive gasoline in the engine. HOSE STORAGE Once the high pressure hose is rolled, hang it on the back of the machine using the stretch strap to secure in place. ON/OFF SWITCH The on/off switch is used in combination with the starter grip and rope to start the engine. It is also used to turn the engine off. SOAP NOZZLE The blue or black soap nozzle is used to apply detergent at low pressure only. STARTER GRIP AND ROPE The starter grip and rope is pulled to start the machine. THERMAL RELIEF VALVE This pump feature will prevent water temperatures from reaching harmful levels by releasing a small amount of water. Once the water has drained, the thermal relief valve will reset itself. TRIGGER HANDLE The trigger handle has a gripping surface that provides added control of the spray wand and helps reduce fatigue. TRIGGER WITH LOCK OUT Pulling the trigger releases a stream of water for high pressure cleaning. The lock out provides protection against unauthorized use. ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the product and any accessories from the box. Make sure that all items listed in the Packing List are included. NOTE: This tool is heavy. To avoid back injury, lift with your legs, not your back, and get help when needed. WARNING: Do not use this product if any parts in the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-860-4050 for assistance. 6 - English