Ryobi RYAC804-S Operation Manual - Page 11
Warning
View all Ryobi RYAC804-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
OPERATION WARNING: Do not use snow shovel on ice, which can cause the operator to slip and fall, resulting in possible serious personal injury. WARNING: Do not wear loose clothing, scarves, or jewelry. They can be caught in moving parts and cause death or serious personal injury. WARNING: Keep all snow discharge pointed away from all electrical devices to reduce the risk of electrocution or electric shock. WARNING: Never point the snow shovel in the direction of people or pets. Thrown snow or other objects can cause serious personal injuries. WARNING: Make sure the area to be cleared is free of stones, sticks, wires, gravel, and other objects that could be accidentally thrown by the snow shovel in any direction and cause serious personal injury to the operator and others. Take notice of the direction of the wind before beginning. When possible, discharge snow in the same direction as the wind to prevent snow from being thrown back into your face. Work in one direction. Start the snow shovel and push forward to clear snow, then stop the motor as you return to the starting point to begin plowing another strip. The snow shovel has a clearing depth of 10 in. If your snow is deeper than 10 in., it may take more than one pass to clear. If the unit comes in contact with any type of obstruction or debris during use, stop the snow shovel, disconnect from power supply, remove the obstruction, and inspect the unit carefully for damage before proceeding. WARNING: Never reach into the impeller or place any body part in front of the snow shovel when the unit is operating or when the unit is plugged in. Always ensure all moving parts have stopped and the snow shovel has been unpugged before clearing any obstructions. Failure to follow these instructions can result in serious personal injury. Some parts of the snow shovel can freeze under extreme weather conditions. Do not attempt to operate the unit with frozen parts. When finished, allow the unit to run for several minutes to allow all snow to clear the impeller before storing. 9 - English