Ryobi RYI2200 User Manual 5 - Page 14
Features - parallel kit
View all Ryobi RYI2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
FEATURES KNOW YOUR GENERATOR See Figure 1. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all o perating features and safety rules. 120 V AC RECEPTACLES Your generator has two single phase, 60 Hz outlets that are 120 Volt AC, 20 Amp receptacles. These can be used for operating appropriate appliances, electrical lighting, tools, and motor loads. AIR FILTERS The air filters help to limit the amount of dirt and dust drawn into the unit during operation. AUTO IDLE SWITCH The auto idle switch is used to control the speed of the engine and conserve fuel. When the switch is in the ON (I) position and no appliances are connected to the unit, the engine will idle. If an appliance is added, the engine speed will increase to power the item. If the appliance is removed, the engine will return to idle. BATTERY CHARGING CABLE The battery charging cable makes it easy to charge 12 Volt lead acid batteries with the generator. NOTE: Only use battery charging cable to charge vented wet lead acid batteries. CARRY HANDLES The generator is equipped with two carry handles for easy transport. Both handles should be used to carry the generator. DC CIRCUIT BREAKER The circuit breaker is provided to protect the generator against electrical overload. DC RECEPTACLE Your generator has a 12 volt, 7.5 Amp DC receptacle for charging lead acid batteries. WARNING: The 12 V DC receptacle is designed to charge vented wet lead acid batteries only. Other types of batteries may burst, causing personal injury and damage. FUEL TANK The fuel tank has a capacity of 1.0 gallon. GROUND TERMINAL The ground terminal is used to assist in properly grounding the generator to help protect against electrical shock. Consult with a local electrician for grounding requirements in your area. LED DISPLAY LEDs provide feedback to indicate whether the generator is in use, overloaded, or in need of lubricant. OIL CAP/DIPSTICK Remove the oil fill cap to check and add lubricant to the generator when necessary. PARALLEL KIT TERMINALS The non-polarized parallel kit terminals are used with a parallel kit (sold separately) that will allow generators to be linked together to increase output. NOTE: Read and understand the parallel kit's instructions prior to use. Kit is for usage with this unit only. RESET BUTTON The reset button is used to restore power if an overload occurs. To restore power, depress the reset button. RETRACTABLE HANDLE The generator is equipped with a retractable handle that can be adjusted for storage and transportation. STARTER GRIP AND ROPE The starter grip and rope is used (along with the engine/ choke lever) to start the generator's engine. ENGINE/CHOKE LEVER The engine/choke lever is used when starting, stopping, and running the engine. 10 - English