Ryobi SC165VS User Manual - Page 6
Features, Assembly, Operation
View all Ryobi SC165VS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
FEATURES PRODUCT SPECIFICATIONS Input...120 Volts, AC Only, 60 Hz, 4.8 Amps No Load Speed...600-3,000/min. Stroke Length...3/4 in. Orbital Settings...4 ASSEMBLY WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. If any parts are damaged or missing, please call 1-800-525-2579 for assistance. In Mexico, please call 01-800-843-1111. OPERATION WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this product for the purposes listed below: Cutting all types of wood products (lumber, plywood, paneling, composition board and hard board) Cutting thin sheet metal (metal cutting blade not included) Cutting plastics and laminates INSTALLING BLADE See Figure 1, page 11. NOTE: The jig saw is designed for T-shank blades only. To install blade: Unplug the saw. Rotate orbital adjustment knob to position 3. Rotate the rapid change blade clamp so that the slot in the blade clamp is aligned with the slot in the blade support roller. Holding the blade clamp in place, insert the saw blade as far as possible into the slot in the blade clamp body and blade support roller. Check to make sure the back of the saw blade is centered in the slot of the blade support roller and blade clamp. Release the blade clamp. Make sure the blade is securely in place. NOTE: Check that the blade is inserted fully and completely secured. Blade will lock into position when correctly installed. Do not use the tool if the blade is not installed correctly. Rotate orbital adjustment knob back to desired position. To remove blade: Unplug the saw. Allow blade to cool. 6 - English