Ryobi SC165VS User Manual - Page 9

ADJUSTMENTS WARNING: Before performing any adjustment, make sure the product is unplugged from the power supply. Failure to heed this warning could result in serious personal injury. TIGHTENING BASE ADJUSTMENT LEVER See Figures 12 - 13, page 13. The base adjustment lever may need occasional ­tightening.  Unplug the saw.  If attached, remove the vacuum attachment.  Remove the base plate screws and base plate by remov- ing the four base screws to expose the adjusting nut.  Release the base adjustment lever by pulling it forward.  Tighten the adjusting nut 1/4 of a turn in the clockwise direction.  Engage the adjustment lever by pushing it back under the motor assembly and check the base for any movement.  If the base is still loose, release the adjustment lever and tighten the adjusting nut another 1/4 of a turn. Repeat until the base is secure after engaging the adjustment lever.  Reinstall the base plate and four base plate screws. CALIFORNIA PROPOSITION 65 WARNING: This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities may contain chemicals, including lead, known the State of California to cause cancer, birth defects or other reproductive harm. Wash hands after handling. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and • arsenic and chromium from chemically-treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. 9 - English