Samsung 460CX Quick Start Guide - Page 27

" For

an explanation of Component video, consult your DVD or extern

manual.

Connecting to a Camcorder

1.

Locate

the AV output jacks on the camcorder. They are usually found o

or back of the camcorder. Connect a set of audio cables betw

OUTPUT jacks on the camcorder and the AV/COMPONENT AUDIO IN [R-AUDIO-

L] on the LCD Display .

2.

Connect a video cable between the VIDEO OUTPUT jack on the camco

AV IN [VIDEO] on the LCD Display .

3.

Select

AV

for the Camcorder connection using the SOURCE button on the fro

the LCD Display or on the remote control.

4.

Then, start the Camcorder with a tape inserted.

Note

The audio-video cables shown here are usually included with a Ca

check your local electronics store.) If your camcorder is stereo, yo

set of two cables.

Connecting Using a HDMI Cable

1.

Connect

input devices such as a Blu-Ray/DVD player to the HDMI IN term

the LCD Display using an HDMI cable.

Note

" In HDMI mode, only PCM format audio is supported.

Connections

34