Samsung BD-JM51 User Manual - Page 16
Media Play - firmware update
View all Samsung BD-JM51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
✎✎ NOTES ■■ No disc should be in the product when you upgrade the software using the USB Host jack. ■■ When the software upgrade is done, check the software details in the software Upgrade menu. ■■ Do not turn off the player during the software upgrade. It may cause the player to malfunction. ■■ Software upgrades using the USB Host jack must be performed with a USB flash memory stick only. Auto Upgrade Notification If you have connected the player to your network, and then set Auto Upgrade Notification on, the player automatically notifies you when a new software version is available for the player. To set Auto Upgrade Notification on, follow these steps: 1. Select Auto Upgrade Notification, and then press the v button. 2. Use the ▲▼ buttons to select On, and then press the v button. If there is a new software version available, the player notifies you with a popup message. 1. To upgrade the firmware, remove any discs from the player. 2. Select Yes in the Pop-up. The player turns off automatically, then restarts, and begins the download. (Never turn the player on or off manually during an upgrade.) 3. The update progress popup appears. 4. When the update is complete, the player will restart automatically. ✎✎ NOTES ■■ The upgrade is complete when the player turns off, and then turns on again by itself. ■■ Never turn the player off or on manually during the update process. ■■ Samsung Electronics takes no legal responsibility for player malfunction caused by an unstable Internet connection or consumer negligence during software upgrade. Contact Samsung Provides contact information for assistance with your player. Terms of Service Agreement Lets you view the general disclaimer regarding third party contents and services. Reset Returns all settings to their factory defaults except for the network settings. Media Play Playing a Commercially Recorded Disc 1. Press the 8 button to open the disc tray. 2. Place a disc gently into the disc tray with the disc's label facing up. 3. Press the 8 button to close the disc tray. Playback starts automatically. Playing Files on a USB Device There are two methods you can use to play or view multimedia files located on a USB device. Method 1 1. Turn the player on. 2. Connect the USB device to the USB port on the front panel of the player. The New Device Connected pop-up appears. Play Disc No Disc Photos Videos New device connected. Photos Videos Music 123 > Move " Enter ' Return App 1 App 2 App 3 App 4 App 5 More Change Device Music Settings ✎✎ NOTE ■■ If the pop-up does not appear, go to Method 2. 3. Use the ▲▼ buttons to select Photos, Videos, or Music, and then press the v button. The Photos, Videos & Music screen appears listing the content of the device. Depending on how the contents are arranged, you will see either folders, individual files, or both. ✎✎ NOTE ■■ Even though the player will display folders for all content types, it will only display files of the Content Type you selected in Step 3. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the Photos, Videos & Music screen and going to Step 3 in Method 2 below. 4. If necessary, use the buttons to select a folder, and then press the v button. 5. Select a file to view or play, and then press the v button. 6. Press the RETURN button to exit a folder or the EXIT button to return to the Home screen. 7. Go to pages 18~20 for instructions that explain how to control playback of videos, music, and pictures on a USB device. 16