Samsung BD-JM59 User Manual - Page 10
Settings - bluray
View all Samsung BD-JM59 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Wireless Network Settings The Setup Procedure Setup I On-Screen Language Wireless Router Broadband service ✎✎ NOTES ■■ If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the wireless network. ■■ Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported. ■■ The player supports only the following wireless security key protocols: - WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES) ■■ Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure. ■■ In compliance with the newest Wi-Fi certification specifications, Samsung Blu-ray players do not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security encryption in networks running in the 802.11n mode. ■■ Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance, distance, obstacles, interference by other radio devices, etc). •• The Home screen will not appear if you do not configure the Setup. •• The OSD (On Screen Display) may change in this player after you upgrade the software version. •• The access steps may differ depending on the menu you selected. •• After the Setup process is complete, you can then operate the panel buttons and remote control. After you have connected the player to your TV, turn on the TV and player. When you turn on the player the first time, the player's Setup screen appears on the TV. The Setup procedure lets you set the On Screen Display (OSD) and menu languages, the aspect ratio (screen size), the network type, and connect the player to your network. To run the Setup procedure, follow these steps: 1. Plug in the Blu-ray player, turn on your TV, and then turn on the Bluray player by pressing the POWER button on the remote. The Setup Language screen appears. Select a language for the on-screen displays. Hrvatski Dansk Nederlands English > Move " Select 2. Select the desired language, and then press the v button. The Start screen appears. Setup TV Aspect and Network will be set. Each setting may be changed later under "Settings" Start a Previous " Select 3. Press the v button. The TV Aspect screen appears. 4. On the TV Aspect screen, select the desired TV Aspect Ratio, and then press the v button. The Network screen appears. ✎✎ NOTE ■■ An explanation of each Aspect Ratio appears on the screen. Highlight each choice to see each explanation. If you have an HDTV, we suggest you choose 16:9 original. 10