Samsung BD-JM59 User Manual - Page 15
Enter manually, ADDress, RETURN, Wireless Network, Wireless - Automatic, Settings, Network, Wireless
View all Samsung BD-JM59 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3. Select the IP Setting field, and then press the v button. 4. Select Enter manually in the IP Setting field, and then press the v button. 5. Select a parameter to enter (IP Address, for example), and then press the v button. Use the number keypad on your remote control to enter the numbers for the parameter. Use the ◀▶ buttons on the remote control to move from entry field to entry field within a parameter. When done with one parameter, press the v button. 6. Press the ▲ or ▼ button to move to another parameter, and then enter the numbers for that parameter following the instructions in Step 5. 7. Repeat Steps 5 and 6 until you have filled in all parameters. ✎✎ NOTE ■■ You can get the Network parameters from your Internet provider. 8. When finished entering all the parameters, press the RETURN or EXIT button. The player verifies the network connection, and then connects to the network. Wireless Network You can setup a wireless network connection in four ways: -- Wireless Automatic -- Wireless Manual -- WPS(PBC) -- WPS(PIN) When you configure the wireless network connection, any wireless network devices currently connected through the player or, if applicable, the player's current wired connection, will be disconnected. ĞĞ Wireless - Automatic 1. In the Home screen, select Settings, and then press the v button. 2. Select Network, and then press the v button. 3. Select Network Settings, and then press the v button. 4. Select Wireless in the Network Settings screen, and then press the v button. The player searches for and then displays a list of the available networks. Network Settings Select your network type. Network type Wireless network Add Network Wireless WPS(PBC) Search You can connect your Blu-ray player to the internet. Please select which wireless network to use. m Move " Select ' Return 5. Select the desired network, and then press the v button. 6. On the Security screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing v button. 7. When finished, select Done and then press the v button. The player verifies the network connection and then connects to the network. 8. When verification is complete, select OK, and then press the v button. ✎✎ NOTE ■■ You should be able to find the Security Code or Pass Phrase on one of the set up screens you used to set up your router or modem. ĞĞ Wireless - Manual If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually. 1. Follow the directions in Wireless Automatic through Step 5. 2. The player tries to connect to the network, and then displays the connection failed message. 3. On the bottom of the screen, select IP Settings, and then press the v button. The IP Settings screen appears. 4. Select the IP Setting field, and then press the v button. 5. Select Enter manually in the IP Setting field, and then press the v button. 6. Select a parameter to enter (IP Address, for example), and then press v button. Use the number keypad on your remote control to enter the numbers for the parameter. Use the ◀▶ buttons on the remote control to move from entry field to entry field within a parameter. When done with one parameter, press the v button. 7. Press the ▲ or ▼ button to move to another parameter, and then enter the numbers for that parameter following the instructions in Step 6. 8. Repeat Steps 6 and 7 until you have filled in all parameters. ✎✎ NOTE ■■ You can get the Network parameters from your Internet provider. 9. When finished, press the RETURN or EXIT button. The Security Screen appears. 10. On the Security screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the buttons, and then pressing the v button. 15