Samsung BRF425200AP/AA User Manual - Page 34
Leveling the Refrigerator, If greater height is required, the installer
View all Samsung BRF425200AP/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installation instructions 8. Leveling the Refrigerator 10 mm bit 1. Using your drill and the bit shown below, engage each of the refrigerator's adjuster shafts in turn, and level the refrigerator. (CW , CCW ) 2. Adjust the gap between the furniture and CABI TOP COVER to 1/8" (3 mm). CAUTION The front and rear leveling legs have a maximum height adjustment of 3/4" (20 mm). If greater height is required, the installer may raise the refrigerator on a sheet of plywood or runners. Raising the refrigerator above 3/4" (20 mm) will damage the front and rear leveling components. Front Rear Adjustable shaft (10 mm) Jack type (height adjustment) Max 3/4", 20 mm 34 English T-TYPE_BRF9000M_IM_DA68-03621D-02_EN.indd 34 2017-12-14 12:27:06
Installation instructions
English
34
8. Leveling the Refrigerator
10 mm bit
1.
Using your drill and the bit shown
below, engage each of the refrigerator’s
adjuster shafts in turn, and level the
refrigerator. (CW
, CCW
)
2.
Adjust the gap between the furniture
and CABI TOP COVER to 1/8” (3 mm).
CAUTION
The front and rear leveling legs have
a maximum height adjustment of 3/4”
(20 mm).
If greater height is required, the installer
may raise the refrigerator on a sheet of
plywood or runners.
Raising the refrigerator above 3/4”
(20 mm) will damage the front and rear
leveling components.
Adjustable shaft
(10 mm)
Front
Rear
Jack type (height adjustment)
Max 3/4”,
20 mm
T-TYPE_BRF9000M_IM_DA68-03621D-02_EN.indd
34
2017-12-14
°° 12:27:06