Samsung BRF425200AP User Manual - Page 24
Connecting to the main water supply
View all Samsung BRF425200AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installation requirements Connecting to the main water supply Before connecting the refrigerator's water line to the house's main water supply, you need to familiarize yourself with the house's plumbing layout. Water supply outlet range 6" (154 mm) a 1" 1/2" (13 mm) ø1/4" (6.5 mm) 9" (228 mm) 1/2" (13 mm) Callout a 42" 12" (305 mm) 1. Decide how best to use the plumbing layout. Then 2. Tap into the main water line while following these requirements: - The installer must provide the 1/4" (6.5 mm) water line and all fittings. - The water line must be long enough to provide slack to allow the refrigerator to be moved for floor cleaning and servicing, without the need to first disconnect the water line. - All new installations must meet local plumbing code requirements. - The water shutoff should be placed in the base cabinet on either side of the refrigerator or in some other easily accessible area. - If the water shut-off valve is placed in the back wall behind the refrigerator, it must be at an angle so that the water line is not kinked when the refrigerator is pushed into its final position. - Make sure the water supply pipe is within the range shown in the 1" illustrations. - The water hose is positioned within 1/2" from the back wall, and is withdrawn to the front along the gray-colored area in the figure above. The water hose must be taped on the floor. 24 English T-TYPE_BRF9000M_IM_DA68-03621D-02_EN.indd 24 2017-12-14 12:27:03