Samsung CLP 300N Service Manual - Page 73
How to use EDC (Engine Diagnostic Control) Mode, 6.1 Enterence, 6.2 Keys, 6.3 EDC Map - clp 300
UPC - 635753722093
View all Samsung CLP 300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Alignment and Adjustmens 6.6 How to use EDC (Engine Diagnostic Control) Mode EDC Mode is feature that allows the engineer to check the condition of the print engine. It can check the operating condition of the motors, sensors, solenoids and clutches, measure the High Voltage from the HVPS and check the operation of the fuser and LSU. 6.6.1 Enterence When trying to check the CLP-300 Series EDC Mode, additional EDC execution program needed. [ Procedure of EDC Mode operation ] a) First, turn on the Power of Printer, wait until Ready state b) In this state, Run the EDC program on the computer c) After that, click the menu of screen d) Then appears on the initial screen e) Should you get out of this program, press Exit of screen 6.6.2 Keys Key Exit Update LCD Menu Left/Right arrow Enter Upper level Discription Close program Update value (ex : sensor value) Move to the top menu Move test item Start testing or select Sub-item Stop testing or the upper menu 6.6.3 EDC Map Samsung Electronics Service Manual 6-13