Samsung CLP-315W User Manual (ENGLISH) - Page 35
Selecting and loading print media, If you experience problems with paper feed, place one sheet at - jamming
UPC - 635753721232
View all Samsung CLP-315W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
manually. Adjust the paper length guide and paper width guide. The tray is preset to Letter or A4 size, depending on your country. To change the size to A4 or Letter, you must adjust the lever and paper width guide properly. 1 Pull the tray out of the machine. Open the paper cover and remove paper from the tray if necessary. 2 If you want to change the size to Letter, hold the lever at the back of the tray, and rotate the lever clockwise. • Do not push the paper width guides far enough to cause the materials to warp. • If you do not adjust the paper width guides, it may cause paper jams. 5. Close the paper cover. 3 Squeeze the paper width guide and slide it to the edge of the lever. 6. Slide the tray back into the machine until it clicks. 7. After loading paper, set the paper type and size for the tray. See "Setting the paper size and type" on page 36. • If you experience problems with paper feed, place one sheet at a time in the tray. • You can load previously printed paper. The printed side should be facing up with an uncurled edge at the rear. If you experience problems with paper feed, turn the paper around. Note that print quality is not guaranteed. If you want to change the size to A4, first move the paper width guide to left and rotate the lever counterclockwise. If you force the lever, it could damage the tray. Selecting and loading print media_ 35