Samsung CLP-315W User Manual (ENGLISH) - Page 96
Using SetIP program, Starting the program, Using the Unified Driver Configurator
UPC - 635753721232
View all Samsung CLP-315W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Using SetIP program This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it is for the network administrator to set several network IPs at the same time. You can only use SetIP program when your machine is connected to a network. SetIP program should be automatically installed during the printer driver installation. Starting the program 1 Print the machine's network information report which includes your machine's MAC address. 2 Open the /opt/Samsung/mfp/share/utils/. 3 Double click the SetIPApplet.html file. 4 Click in the SetIP window to open the TCP/IP configuration window. 5 Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply. NOTE: when you enter the MAC address, enter it without colon(:). 6 The machine prints the network information. Confirm all the settings are correct. 7 Close the SetIP program. Using the Unified Driver Configurator Unified Linux Driver Configurator is a tool primarily intended for configuring Printer. After installing the Unified Linux driver, the Unified Linux Driver Configurator icon will automatically be created on your desktop. Opening the Unified Driver Configurator 1 Double-click Unified Driver Configurator on the desktop. You can also click the Startup Menu icon and select Samsung Unified Driver and then Unified Driver Configurator. 2 Press each button on the Modules pane to switch to the corresponding configuration window. Printers Configuration button Ports Configuration button You can use the onscreen help by clicking Help. 3 After changing the configurations, click Exit to close the Unified Driver Configurator. 29 Using Your Printer in Linux