Samsung CLP-350N User Manual - Page 34

Caution, Repeat this action two or three times. - imaging unit

Get Samsung CLP-350N PDF manuals and user guides View all Samsung CLP-350N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

4 Extend the top handle on the imaging unit and then use it to pull the imaging unit out of the machine completely. 6 Pull the imaging unit about half and push it until it sounds 'click'. Repeat this action two or three times. Caution • Do not touch the green surface on the imaging unit with your hands or any other material. Use the handle on it in order to avoid touching this area. • Be careful not to scratch the surface of the imaging unit. • To prevent damage, do not expose the imaging unit to light for more than a few minutes. Cover it with a piece of paper to protect it if necessary. 5 Look inside the machine. Remove any dust, paper particles, and spilled toner with a damp, soft lint-free cloth. 7 Push the imaging unit until it sounds 'click' in to the machine. 8 Close the front cover firmly. Note After cleaning, let the machine to dry completely. Caution If your machine or its surrounding is contaminated with toner, we recommend you to use a cloth or tissue dampened with water to clean it. If you use a vacum cleaner, toner blows into the air then might be harmful to you. Caution If the front cover is not completely closed, the macnine will not operate. Please make sure all toner cartridges are installed properly. If any toner cartridge is installed improperly, the front cover do not close. 9 Plug the power cord in and turn the machine on. 6.2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
6
.2
<
Maintenance>
4
Extend the top handle on the imaging unit and then use it to pull the
imaging unit out of the machine completely.
Caution
•
Do not touch the green surface on the imaging unit with your
hands or any other material. Use the handle on it in order to
avoid touching this area.
•
Be careful not to scratch the surface of the imaging unit.
•
To prevent damage, do not expose the imaging unit to light for
more than a few minutes. Cover it with a piece of paper to
protect it if necessary.
5
Look inside the machine. Remove any dust, paper particles, and
spilled toner with a damp, soft lint-free cloth.
Note
After cleaning, let the machine to dry completely.
Caution
If your machine or its surrounding is contaminated with toner,
we recommend you to use a cloth or tissue dampened with
water to clean it. If you use a vacum cleaner, toner blows into
the air then might be harmful to you.
6
Pull the imaging unit about half and push it until it sounds 'click'.
Repeat this action two or three times.
7
Push the imaging unit until it sounds 'click' in to the machine.
8
Close the front cover firmly.
Caution
If the front cover is not completely closed, the macnine will not
operate. Please make sure all toner cartridges are installed
properly. If any toner cartridge is installed improperly, the front
cover do not close.
9
Plug the power cord in and turn the machine on.