Home » Samsung Manuals » Printers » Samsung CLP-350N » Manual Viewer

Samsung CLP-350N User Manual - Page 36

Replacing the toner cartridge, Status - black toner

Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

4 Grasp the toner cartridge and align it with the corresponding slot inside the machine. Insert it back into its slot until it clicks into place, and rotate the toner cartridge clockwise. 1 Turn the machine off, then wait a few minutes for the machine to cool. 2 Open the front cover. Note If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric. 5 Close the front cover. Make sure that the cover is securely closed. 3 Holding the corresponding toner cartridge's handle, rotate it counter-clockwise, and pull it out to remove from the machine. Replacing the toner cartridge The machine uses four colors and has a different toner cartridge for each one: yellow (Y), magenta (M), cyan (C), and black (K). When the toner colors LED, on the control panel, indicating each individual toner cartridge according to its color, lights, and the Status LED lights red, the machine cartridge is totally exhausted. Your machine stops printing. Also, the Smart Panel program window appears on the computer telling you to replace the cartridge. At this stage, the toner cartridge needs to be replaced. Check the type of toner cartridge for your machine. (See "Supplies" on page 8.1.) Note The print quality may get poor if the refilled toner cartridge is installed, since its characteristics may significantly differ from the genuine. 4 Take a new toner cartridge out of its package. 5 Holding the toner cartridge, shake thoroughly it from side to side to distribute the toner. 6.4

Section	Page
Contents	5
Introduction	12
Special features	12
Machine overview	13
Control panel overview	14
Understanding the Control Panel	15
LEDs	15
Stop button	15
Software overview	16
Supplied software	16
Printer driver features	16
System requirements	17
Getting Started	18
Setting up the hardware	18
Setting up the network	18
Supported operating systems	19
Using SetIP program	19
Installing the software	20
Altitude adjustment	21
Selecting and loading print media	22
Selecting print media	22
Guidelines for selecting and storing print media	22
Specifications on print media	23
Guidelines for special print media	24
Verifying the output location	25
Loading paper	25
In the tray	25
Using manual feed mode	28
Printing on special print materials	28
Printing on envelopes	28
Printing on labels	29
Printing on transparencies	29
Printing on preprinted paper	30
Printing on card stock or custom-sized materials	30
Setting the paper size and type	31
Basic printing	32
Printing a document	32
Canceling a print job	32
Maintenance	33
Printing a machine configuration report	33
Cleaning your machine	33
Cleaning the outside	33
Cleaning the inside	33
Maintaining the cartridge	35
Toner cartridge storage	35
Expected cartridge life	35
Redistributing toner	35
Replacing the toner cartridge	36
Replacing the Imaging Unit	37
Replacing the Waste Toner Container	39
Maintenance Parts	40
Managing your machine from the website	40
Troubleshooting	41
Tips for avoiding paper jams	41
Clearing paper jams	41
In the tray 1	41
In the optional tray	43
Solving other problems	44
Paper feeding problems	44
Printing problems	44
Printing quality problems	46
Common Windows problems	48
Common PostScript problems	49
Common Linux problems	49
Common Macintosh problems	50
Ordering supplies and accessories	51
Supplies	51
Accessories	51
How to purchase	51
Installing accessories	52
Precautions to take when installing accessories	52
Installing a memory module	52
Activating the added memory in the PS printer properties	53
Specifications	54
Glossary	55
Index	57
Software section	58
Software section Contents	59
Installing Printer Software in Windows	62
Installing Printer Software	62
Installing Software for Local Printing	62
Installing Software for Network Printing	65
Reinstalling Printer Software	68
Removing Printer Software	69
Installing mono printer driver	69
Basic Printing	70
Printing a Document	70
Printing to a file (PRN)	71
Printer Settings	71
Layout Tab	72
Paper Tab	72
Graphics Tab	73
Extras Tab	74
About Tab	74
Printer Tab	74
Using a Favorite Setting	75
Using Help	75
Advanced Printing	76
Printing Multiple Pages on One Sheet of Paper (N-Up Printing)	76
Printing Posters	77
Printing Booklets	77
Printing on Both Sides of Paper	78
Printing a Reduced or Enlarged Document	78
Fitting Your Document to a Selected Paper Size	78
Using Watermarks	79
Using an Existing Watermark	79
Creating a Watermark	79
Editing a Watermark	79
Deleting a Watermark	79
Using Overlays	80
What is an Overlay?	80
Creating a New Page Overlay	80
Using a Page Overlay	80
Deleting a Page Overlay	80
Using Windows PostScript Driver	81
Printer Settings	81
Advanced	81
Using Help	81
Sharing the Printer Locally	82
Setting Up a Host Computer	82
Setting Up a Client Computer	82
Using Smart Panel	83
Understanding Smart Panel	83
Opening the Troubleshooting Guide	84
Using Printer Settings Utility	84
Using Onscreen Help File	84
Changing the Smart Panel Program Settings	84
Using Your Printer in Linux	85
Getting Started	85
Installing the Unified Linux Driver	85
Installing the Unified Linux Driver	85
Uninstalling the Unified Linux Driver	86
Using the Unified Driver Configurator	87
Opening the Unified Driver Configurator	87
Printers Configuration	87
Ports Configuration	88
Configuring Printer Properties	88
Printing a Document	89
Printing from Applications	89
Printing Files	89
Using Your Printer with a Macintosh	90
Installing Software	90
Printer driver	90
Setting Up the Printer	91
For a Network-connected	91
For a USB-connected	91
Printing	92
Printing a Document	92
Changing Printer Settings	92
Printing Multiple Pages on One Sheet of Paper	94
Software section Index	95
A	95
B	95
D	95
E	95
F	95
G	95
H	95
I	95
L	95
M	95
N	95
O	95
P	95
R	95
S	95
T	96
U	96