Samsung DV48J7700EW/A2 User Manual - Page 26
Connecting the inlet hose
View all Samsung DV48J7700EW/A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Installation Installation Connecting the inlet hose Method1 The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old hoses. (long hose : Canada model only supplied) 1. If space permits, attach the brass female end of the "Y" connector to the cold water faucet. 2. Turn the cold water faucet off. 3. Attach the straight end of the long hose to the "Y' connector. 4. Using pliers, tighten the coupling with an additional two-thirds turn. NOTE Do not overtighten, as it may damage the coupling. 5. Attach the angled end of the long hoses to the fill valve at the bottom of the dryer's rear frame. Screw on the coupling by hand until it is seated on the fill valve connector. 6. Using pliers, tighten the coupling with an additional two-thirds turn. NOTE Do not overtighten, as it may damage the coupling. 7. Turn the cold water faucet on. 8. Check for leaks around the "Y" connector, faucets, and hoses. 26 English %7+2@&/64JOEE