Samsung DV48J7770GP/A2 User Manual - Page 23
Four Wire System instructions
View all Samsung DV48J7770GP/A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installation 8. Four Wire System instructions: D A. External ground connector B. Green or bare copper wire of power A cord C. ¾" (1.9 cm) UL-listed strain relief D. Center silver-colored terminal block screw B E E. Neutral grounding wire (white) F. Neutral wire (white or center wire) F a. Remove the External ground C connector screw. b. Connect the ground wire (green or unwrapped) of the power cord to the external ground connector screw. If you want to connect B (Green or bare copper wire of power cord) to the Neutral Post without connecting it to A (cabinet ground), call a service technician. c. Loosen or remove the center terminal block screw. d. Connect the neutral wire (white or center wire) of the power cord and the appliance ground wire (white) under the central screw of the terminal block. e. Connect the other wires to the outer terminal block screws. Tighten screws. f. Tighten the strain relief screws. g. Insert the tab of the terminal block cover into your dryer's rear panel slot. Secure the cover with a hold- down screw. NOTE We recommend using ring terminals. If you use strap terminals, please ensure you install them perfectly. English 23 %7+2@&/64JOEE