Samsung DV48J7770GP/A2 User Manual - Page 24
For U.S. models: Risk of electrical shock, leveller A, leveling feet B
View all Samsung DV48J7770GP/A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installation Installation WARNING For U.S. models: Risk of electrical shock • All U.S.models are designed for a 3-WIRE SYSTEM CONNECTION. The dryer frame is grounded to the neutral conductor at the terminal block. A 4-WIRE SYSTEM CONNECTION is required for new or remodeled construction, mobile homes, or if local codes do not permit grounding through neutral. If you use the 4-wire system, you cannot ground the dryer frame to the neutral conductor at the terminal block. • Remove the terminal block cover plate. Insert the power cord with a UL-listed strain relief through the hole provided in the cabinet near the terminal block. • A strain relief must be used. Do not loosen the nuts already installed on the terminal block. Be sure they are tight. Use a 3/8" (1cm) deep well socket. 9. To ensure that the dryer provides optimal drying performance, it must A be level. To level the dryer, follow the lettered steps below: A. Using a leveller (A), check if the dryer is level side to side and then front to back. B. If the dryer is not level, adjust the leveling feet (B) on the bottom of the dryer until the dryer is level side to side and back to front. Turning the feet clockwise retracts the feet. Turning the feet clockwise loosens and extends them. B 24 English %7+2@&/64JOEE