Samsung DV50K8600GV/A3 User Manual - Page 42
after Wrinkle Prevent, Wrinkle Away
View all Samsung DV50K8600GV/A3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Troubleshooting Problem Items still wrinkled after Wrinkle Prevent (Wrinkle Away, Wrinkle Release). Water drips from the nozzle when Steam cycles starts. Sprayed water is not visible during Steam cycles. Extended time. Action • Small loads of 1 to 4 items work best. • Load fewer items. Load similar-type items. • Take out the items immediately after drying is complete. • This is steam condensation. The dripping water will stop after a short time. • Sprayed water is difficult to see when the door is closed. • Sensor Dry automatically senses the moisture in the load and shuts the dryer off when the selected dryness level is reached. The drying time can change according to the type and amount of laundry. See the cycle chart for reference. If a problem persists, contact a local Samsung service center. Troubleshooting 42 English DV8700K-03170T-01_EN (US).indd 42 2015-12-08 1:05:09