Samsung DV56H9100EG/A2 User Manual Ver.1.0 (English, French, Spanish) - Page 25

02 operating instructions, tips RACK DRY Using the drying rack 1. The drying rack is installed in the drum at in default state. 2. When using this dryer for the first time, remove the drying rack from the drum. Pull upwards vertically and take the drying rack out of the drum. Remove the package and keep it properly stored. 3. When you need to use drying rack, refer to the following steps for installation. Installing the drying rack 1. Open the dryer door. 2. Place the Drying Rack inside the product, and then align the holes of the filter handle of the Drying Rack to the front projections. 3. Place the rear legs in the two recessed areas of the dryer's back wall, and then push down the middle of the drying rack to fix it in place. 4. Place the items to be dried on the rack, leaving space between them so air can circulate. 5. Close the dryer door. 6. Press the RACK DRY button in Time Dry cycle, and then select the time according to the moisture and weight of item. Drying Rack Door Place the Drying Rack inside the dryer, align the holes of the filter handle of the Drying Rack with the front projections, and then secure the back of the Drying Rack. SUGGESTED ITEMS Washable sweaters (block to shape and lay flat on rack) Stuffed toys (cotton or polyester fiberfilled) Stuffed toys (foam or rubber-filled) Foam rubber pillows Sneakers SUGGESTED TEMP. SETTINGS Extra Low (Time Dry cycle) Extra Low (Time Dry cycle) Air Fluff Air Fluff Air Fluff Don't dry the drying rack together with the package when using the drying rack. WARNING Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the items and create a fire hazard. In case this model is not supplied with a Drying Rack, you can purchase it through a service center. English - 25 %7)"
%3:@%7)@64&3
."/6 JOEE