Samsung DVD-E360 User Manual Ver.1.0 (English) - Page 13

Note: - If you have forgotten your password, see "Forgot Password" in the Troubleshooting section. Changing the Password To change the password, follow these steps: 1. On the Settings Menu, Select Security, and then press the ENTER button. 2. Enter the current 4 digit password. If you have never changed the password, enter the default password: 0000. To enter a number, use the buttons to highlight a number, and then press the ENTER button. 3. Select Change Password, and then press the ENTER button. 4. Enter the new 4 digit password. Use the buttons to select a number, and then press the ENTER button. Repeat 4 times. 5. Re-enter the new password in the same manner to confirm. The Security menu re-appears. Setting Up the General Options 1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTING, and then press the ENTER button. 2. Press the π/† buttons to select GENERAL, and then press the ® or ENTER button. 3. Press the π/† buttons to select the desired item, and then press the ® or ENTER button. Each option in the General Setup Menu is described starting below. Screen Message Use to turn on-screen messages On or Off. Black Level Adjusts the brightness of the screen (On or Off). This feature only functions in Video Composite mode. It does not have any effect in HDMI and Component modes. Video Output Select Video Output. - P-SCAN (Progressive) : Select when you want to use Component Out. - I-SCAN (Interlaced) : Select when you want to use Video or Component Out. Setting Up the Support Options The Support option lets you check your DVD player information such as the model code and Software Version. The Serial Number can be found on the back side of your DVD-Player. 1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then press the ENTER button. 2. Press the π/† buttons to select SUPPORT, then press the ® or ENTER button. 3. Select PRODUCT INFORMATION, then press the ® or ENTER button. Reference Firmware upgrade Introduction Upgrading the Firmware will keep your DVD player up-to-date. The latest firmware version for this unit is provided on the Samsung Website (www.samsung.com). How to make an upgrade disc You must burn the latest firmware version onto a blank CD-R or CD-RW disc: 1. Download a new file from Samsung's website (www.samsung.com) Download Center. 2. Write the file to disc using the data disc setting of your disc burning software. Notes The CD should be burned following the specs below: - File System CD-ROM ISO Level. - Please make sure the filename is E360K.BIN - Character set ISO 9660. - Please make sure the root folder rename is - The burned CD has to be Finalized. MEDIATEK - Please burn the CD at a low speed. Upgrade procedure 1. Open the disc tray of your DVD Player. Place the burned disc on the tray. Close the tray. The Firmware upgrade screen will appear. Upgrade File Detected Curent Version: DSP-E360RU-0001.0 New Version: DSP-E360RU-0000.3 Upgrade? Press Play To start 2. Press the ENTER or PLAY button to start the upgrade. - Press any other buttons on the remote control or eject the disc to cancel the upgrade. - During the firmware upgrade process, the tray will open. Please remove the disc and wait for about 2 minutes. - If the DVD player was successfully updated, the disc tray will close and the unit will turn off and on. When the unit turns on, the Select Menu Language screen will appear. Firmware upgrade menu appears Upgrade File Detected Curent Version: DSP-E360RU-0001.0 New Version: DSP-E360RU-0000.3 Upgrade File Copying Upgrade File Detected Curent Version: DSP-E360RU-0001.0 New Version: DSP-E360RU-0000.3 Upgrade? Upgrading 3. Press the π/† buttons to select the desired language, and then press the ENTER button. Firmware upgrade starts On-Screen Menu English Français Deutsch Español Italiano Nederlands Macrovision Number: J892 Select 13