Samsung DVE50M7450W/A3 User Manual - Page 40
WRINKLE RELEASE., nozzle when STEAM - troubleshooting
View all Samsung DVE50M7450W/A3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Troubleshooting Problem Items still wrinkled after WRINKLE PREVENT (WRINKLE-CARE, WRINKLE RELEASE). Water drips from the nozzle when STEAM CARE starts. Sprayed water is not visible during STEAM CARE. Extended time. Action • Small loads of 1 to 4 items work best. • Load fewer items. Load similar-type items. • Take out the items immediately after drying is complete. • This is steam condensation. The dripping water will stop after a short time. • Sprayed water is difficult to see when the door is closed. • Sensor Dry automatically senses the moisture in the load and shuts the dryer off when the selected dryness level is reached. The drying time can change according to the type and amount of laundry. See the cycle chart for reference. If a problem persists, contact a local Samsung service center. Troubleshooting 40 English DV7450M-03170Z-00_EN.indd 40 2017-01-25 11:24:24