Samsung DW80CG5451MTAA User Manual - Page 28
Storm Wash, Sanitize, Power, Normal, Control Lock, Lock 3 sec, Smart Control, SmartThings
View all Samsung DW80CG5451MTAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Operations Operations 04 Lower Rack 05 Sanitize 06 Hi-Temp Wash 07 Lock (3 sec) 08 Smart Control 09 Display If selected, only the lower rack nozzle is activated to reduce both the cycle time and power consumption. Use this cycle to wash a small load of dishes or glasses in the lower rack. To wash heavily soiled items, select the Storm Wash+ option. With the Sanitize option selected, the water temperature is increased to 167 ˚F (75 ˚C) in the final rinse cycle for high temperature sanitization. If you select the Sanitize option, the "Sanitize" lamp blinks when the water temperature reaches the sanitary temperature (over 155 ˚F (68 ˚C)), and then remains illuminated until the Sanitize option ends. When you open the door or press the Power button, the "Sanitize" lamp turns off. NOTE Only Normal cycle with the Sanitize option has been designed to meet the requirements for soil removal and sanitization efficacy in NSF 184. Certified residential dishwashers are not intended for licensed food establishments. For the Sanitize mode, the amount of detergent as 3/4 oz (20 g) in Main wash dispenser and 1/3 oz (10 g) on the door for pre-wash is used. Raises the main wash temperature to improve cleaning for loads containing tough, baked-on food. Control Lock allows you to lock the buttons on the control panel so children cannot accidently start the dishwasher by pressing the buttons on the panel. To lock and unlock the buttons on the control panel, hold the Lock (3 sec) button down for three (3) seconds when the power is On. You can monitor and control the dishwasher remotely through a Wi-Fi connection. To connect the dishwasher to your smart phone for the first time, press and hold Smart Control. For more information, see the "SmartThings" section on page 35. Displays information about the current cycle including the cycle time, remaining time, Delay Start settings, and other cycle-specific information. If a problem occurs during operation, an information code will appear with a warning sound. Refer to the information codes on page 51. 28 English North America_DW5000C_WEB_DW0003_English.indd 28 2023-06-28 11:12:27