Samsung DW80CG5451MTAA User Manual - Page 51
Information codes, Auto Release™ Dry mode
View all Samsung DW80CG5451MTAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Troubleshooting Problem Has a bent upper rack after dishes are loaded. Cannot close the door. Possible cause Solution The dishes are not loaded • Load your dishes as recommended. properly. (See page 17.) Auto Release™ Dry mode is in operation. • Once the door opens in the Auto Release™ Dry mode, the door cannot be closed manually for the next 2 minutes. You may close the door after 2 minutes. Information codes The Control Panel displays information codes to help you understand what is occurring with your dishwasher. Code LC 4C 5C HC Action Leakage check. • If a leak occurs on the water supply valve connection, close the water supply valve and go to your house circuit breaker panel, set the dishwasher's circuit breaker switch to off, and then contact the installer to fix. If the problem continues, contact an authorized Samsung service center. Water supply check. • Check if the water supply valve is closed or clogged, or is frozen. Also check if the supplied water pressure is less than required. If the problem continues, close the water supply valve, and then contact an authorized Samsung service center. Drain check. • After closing the water supply valve, check whether the drain hose is clogged or folded. Also, check whether the drain hole inside the sump is clogged. If the problem continues, contact an authorized Samsung service center. High temperature heating check. • Functional check. With the dishwasher empty, add detergent, and then run a cycle. If the problem continues, go to your house circuit breaker panel, set the dishwasher's circuit breaker switch to off, and then contact an authorized Samsung service center. English 51 North America_DW5000C_WEB_DW0003_English.indd 51 2023-06-28 11:12:30