Samsung DW80H9930US User Manual Ver.1.0 (English) - Page 23

04 cleaning and maintaining Top nozzle 1. Check whether the nozzle holes are clogged by food particles. 2. If cleaning is needed, remove the nozzle. 3. To remove the nozzle, pull out the upper rack first, unfasten the nozzle cap by turning it counterclockwise, and then remove the upper nozzle. 4. Clean the nozzle, re-insert it, and then fasten the nozzle cap to the nozzle by turning the cap clockwise. 5. Check whether the nozzle is engaged correctly by rotating it by hand. CLEANING THE FILTER 1. Remove the lower rack first. 2. Rotate the filter handle counterclockwise to unfasten the filter compartment door. 1 2 Cap nozzle 3. Remove the filter door, and then the flat micro filter underneath. 4. Remove any dirt or other remains from the micro filter and the filter door, and then rinse them under running water. Filter with handle Flat micro filter 5. Re-install the flat micro filter, and then the filter door. 6. Rotate the filter door handle clockwise to lock the filter door. Once a month, clean the filter for better washing performance. If the filter door does not close properly, cleaning performance will be decreased. CAUTION STORING YOUR DISHWASHER If you need to store your dishwasher for an extended period of time, first drain and disconnect it. If you leave water in the hoses and internal components, you can damage the dishwasher. After draining and disconnecting the dishwasher, be sure to turn off the water supply valve and circuit breaker. English - 23 DW80H9950-00149A_EN_140227.indd Sec5:23 2014-02-27 4:15:36